Medical billing audits that find what's slipping through.
A billing audit follows a sample of your claims from the encounter to the final payment. It checks that every CPT, ICD-10-CM code, and modifier is backed by the note, and that each payer paid what your contract says. None of that shows up on a denial report. Undercoding and a quiet underpayment both look exactly like a paid claim, until someone opens the chart.
Certified coders and billers run the audit against the same rules engine TruRev uses to scrub live claims on TruCare OS, so what gets flagged here is the same thing that would trip a real submission. You get a findings report with the dollar impact, the root cause, and a corrective plan, whether TruCare already handles your billing or not.
- Coding accuracy by provider, checked against E/M level support and modifier use
- Charge capture reconciled against your schedule, so missed services surface
- Payments checked against your contracted rates to catch underpayments in the 835
- Denials traced to root cause by CARC code, payer, and the step that failed
- Compliance risk flagged, like an E/M outlier, before a payer's auditor finds it first
- A findings report built to act on, not just read
Schedule a free billing audit
Your information is encrypted and kept private.
The billing audit partner you can trust
Rules change every quarter. Most practices find out the hard way.
CMS updates, new NCCI edits, a payer policy bulletin, any one of these can turn a habit that was compliant last quarter into one that isn't now, and a single drifted habit, like a modifier applied by default, repeats on every claim until someone actually samples the charts.
TruCare's auditors pull that sample by provider, payer, and code family, then check each claim against both the documentation and the payer's current policy, not last year's. What comes back is three numbers: your accuracy, the dollars at risk, and the dollars already left on the table, so the fix addresses the process instead of just the claims that got caught.
Audit experts for claim filing and reimbursement
Find out where the claim actually breaks
Late payments and rejected claims usually get blamed on "billing," but billing isn't one step, it's eligibility, then coding, then charge entry, then follow-up, and a problem at any one of those shows up as a symptom at a later one. An audit tells you which step actually failed, so you fix that instead of reworking the same claims every month.
TruCare's auditors trace the full chain: the 270/271 eligibility check, the coding, the 837 submission, the 277CA acknowledgment, and the 835 posting. Once the audit's done, TruIntel keeps tracking those same measures live, so you can actually see whether the fix held or whether the pattern came back.
They said no? Let's find out why.
Denials rarely happen for a new reason every time. TruCare's audit groups yours by cause, flags which ones are still inside their appeal window, and points to the one upstream step that, fixed once, stops that denial from recurring.
Schedule a free auditBilling audit services that cover every stage of your revenue cycle
Each stage of the revenue cycle answers to its own rule set, so an audit built for coding won't catch what an eligibility audit would, and vice versa. TruCare's medical billing audit services cover the stages that matter most for your specialty and payer mix, or the entire cycle at once.
Eligibility and authorization audit
Checks that 270/271 verification and prior authorizations were actually in place, and that they matched the billed CPT, units, and dates of service.
Patient registration audit
Compares demographic and insurance data against payer records to find the intake errors that turn into eligibility denials weeks later.
Claim submission audit
Reviews 837 claims, clearinghouse rejections, and 277CA acknowledgments to find exactly where a claim breaks before it ever reaches adjudication.
Coding and documentation audit
Certified coders check CPT, ICD-10-CM, HCPCS, and modifiers against the note itself, including whether the E/M level billed is the level the documentation actually supports.
Denial management audit
Groups denials by CARC and RARC code, payer, and root cause, including the enrollment gaps TruCred is built to catch before a claim ever goes out, and flags which recoverable claims are still inside their appeal window.
Payment posting audit
Matches 835 remittances against contracted rates to recover underpayments, and checks that each adjustment landed in the correct CO or PR group instead of the wrong one.
A/R follow-up audit
Reviews aging by payer and bucket to show which claims were actually worked, which were missed, and which are close to a timely filing deadline.
Patient billing audit
Checks that patient balances were billed after adjudication, at the correct amount, with a Good Faith Estimate provided wherever one's required.
Education and outreach
Turns the findings into something providers and staff can actually use, so documentation and coding habits improve after the audit ends instead of repeating the same gap next quarter.
Let's compare an internal self-audit vs. an independent audit
What changes when the audit isn't run by your own team
Internal self-audit
- Staff timePulled from billers, coders, and front-desk staff who still have their regular workload
- ObjectivityReviewers often check work their own team produced, which makes blind spots hard to see
- ConsistencyGets pushed back when claim volume spikes, so problems can run for months unaddressed
- Rule currencyStaff have to track NCCI edits, payer policy, and E/M guidelines on top of their daily work
- Follow-throughFindings often sit in a spreadsheet with no clear owner or next step
Independent TruCare audit
- Staff timeNo added load beyond one findings review with your providers
- ObjectivityCertified coders and billers with no stake in the original work review the claims
- ConsistencyRuns on a set cadence, quarterly or whatever schedule fits your volume
- Rule currencyAuditors track CMS, AMA, and payer policy changes as their core job, applied directly to your sample
- Follow-throughFindings include dollar impact, root cause, and a corrective plan, tracked live in TruIntel
Let's find out if a billing audit is right for your practice
Who reviews your billing is not a small decision, it's your revenue. The right auditor knows your specialty, your payers, and your EHR, improves collections instead of just flagging errors, and shows you exactly where the money is actually going.
Get startedProtect your Medicare payments with a MIPS reporting review
The Merit-based Incentive Payment System adjusts your Medicare Part B payments based on how your MIPS score compares to a single number: the performance threshold. CMS has confirmed the threshold stays at 75 points through the 2028 performance period, with scores below it drawing a negative adjustment and scores above it earning a positive one.
The two sides of that adjustment aren't symmetric. Miss the threshold and you can lose up to 9% of Part B payments two years later. Clear it, and the upside is scaled for budget neutrality, so it typically lands far short of that same 9%. It's a lopsided bet to get wrong.
TruCare reviews your MIPS reporting before the submission window closes, checking that your quality measures are documented in the note, captured in your EHR, and reported exactly the way CMS specifies, so the work your providers are already doing actually counts toward the score and helps you avoid a MIPS payment penalty.
How do we help you?
End-to-end denial audit and prevention
Denied claims don't just cost the claim, they cost the follow-up time, and every one that sits unworked pushes your days in A/R a little higher. The fix starts with denial root cause analysis: finding out why claims actually stall, using the payer-specific patterns TruCare tracks across every audit it runs.
Do any of these feel familiar?
A wrong date of birth or a misspelled subscriber name is enough for a payer to deny a claim outright, and that kind of eligibility error can hold up payment for weeks over something that took five seconds to get wrong.
The fix:
Each registration denial gets traced back to the exact intake step that caused it, and a validation check gets added there, so demographics are checked against payer records before the claim goes out, not after it comes back.
A code can be entered correctly and still get denied if the payer's own coverage policy doesn't consider it medically necessary for that diagnosis. These denials tend to repeat across an entire code family once a payer updates its policy, not just on one claim.
The fix:
Denials get matched back to the specific payer policy that triggered them, and the coding team flags the pattern before it spreads to every claim using that code, not after the tenth denial makes it obvious.
Every payer sets its own deadline for how long after a visit a claim or appeal can still be submitted, and that window is usually shorter than practices expect, especially on a secondary payer waiting behind a slow primary response.
The fix:
Claims and appeals get tracked against each payer's specific filing deadline instead of one default, so nothing that's still recoverable gets missed because no one was watching that date.
A claim resubmitted before the first one finishes processing reads to a payer as a duplicate, not a follow-up, and gets denied outright, which then delays the original claim even further while the confusion gets sorted out.
The fix:
Claim status gets checked against the payer's own processing timeline before anything is resubmitted, so a follow-up doesn't end up creating the exact problem it was meant to solve.
An authorization that was approved can still result in a denial if the claim doesn't match it exactly on CPT code, unit count, or date of service, a mismatch that's easy to miss until the remittance comes back.
The fix:
Every claim gets checked against its authorization on those specific fields before submission, so a mismatch is caught and corrected while there's still time, not after the denial.
When a patient has more than one payer, billing the wrong one first is one of the most common reasons a clean-looking claim still comes back denied, and it's rarely obvious from the claim itself which payer is actually primary.
The fix:
COB order gets verified against each payer's own records before the claim goes out, so the right payer gets billed first instead of the claim bouncing back after the wrong one rejects it.
Ready to see what your billing is missing?
One call is all a free audit consultation takes. Tell us your specialty, your payers, and your EHR, and you'll hear exactly where an audit would start and what it would measure.
Get startedExplore more features
An audit finds the problems. These keep them from coming back.
Built the same way for a solo practice or a multi-location group.
Insurance verification + eligibility check
TruIntake runs a 270/271 check before every visit and again on the date of service, so a coverage change gets caught before the claim does, not after.
Charge entry support
Charges are reconciled against your schedule and encounters, so a service documented in the note actually makes it onto a claim.
A/R follow-up
Worklists sort aging claims by payer, deadline, and recoverability instead of just balance, so the claims most worth working get worked first.
Payment posting
835 remittances post automatically, and paid amounts get compared against your contracted rates to flag an underpayment before it's absorbed as routine.
Patient billing and collections
Patient statements go out after adjudication with a clear balance, payment plan options, and follow-up on anything that goes overdue.
Reporting and analytics
TruIntel tracks first-pass acceptance, denial rate by reason, and days in A/R live, so you can actually see whether an audit's fixes are holding.
The real expertise and real results of our billing audit team
A partner who explains your revenue, not just a report full of error rates
TruCare's auditors track the modifiers, the NCCI edits, and the payer policies that affect your claims, and watch for the changes before they turn into a pattern of new denials. The goal isn't finding errors for their own sake. It's protecting what you've already earned.
FAQs
Frequently
asked questions
Everything practices ask about our medical billing audits. Don't see your question? Talk to our team.
Schedule a free auditA review of your claims, coding, and payments against payer rules and your documentation. It shows where revenue is slipping, why claims are denied, and which steps in your revenue cycle to fix.
Audit your billing. Protect your profits.
New low rates from
2.49%
of your monthly collections